/tags/ethernet/Ethernet - Tag -Hugo -- gohugo.ioenMon, 28 Sep 2026 09:30:00 +0000/posts/te0950-vpss-udp/Mon, 28 Sep 2026 09:30:00 +0000Jack Bonnell/posts/te0950-vpss-udp/This week I have been getting two IMX219 cameras working on the Trenz TE0950 and sending one stitched picture out over Ethernet. One camera sits on the onboard J15 connector. The other is a CR00240 CSI module on CRUVI HS1. Each stream is scaled in the PL, and the processor sticks the two pictures side by side. I tried mixing them in the PL first. These camera boards do not bring out a frame-sync pin, so the two sensors never stay locked, and the CSI block also stalled if the next IP was not ready yet.